Filter By:
Parts & Accessories

$19.99 - $24.99
Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.

$1.50
Easily convert your Presta valve into a Schrader valve with Genuine Innovations' lightweight, all-aluminum Presta Valve Adaptors.
- Card of 12
- Construction: aluminum
- Airtight O-Ring Seal/Screw On

$10.99
Lezyne's Dual Valve Pump Head is compatible with all high-pressure floor pumps and fits Presta and Schrader valves. Featuring durable composite construction and an aluminum locking lever, it's ready to pump when you are.

$13.99
Replacement ABS Flip Thread Chuck for all Lezyne High-Pressure Floor Drive floor pumps and all Micro Floor Drive hand pumps.

$34.99
Floor pump nylon braided hose with an included ABS1 Pro chuck, compatible with the Pressure Overdrive and Digital Pressure Overdrive.

$49.99
Lezyne's Digital Check Drive is an innovative, compact digital pressure gauge. Composite matrix construction with integrated, low-profile Digital Strip Gauge. Machined aluminum head with flip-style Presta or Schrader valve compatible chuck. Super portable, highly accurate system.
- Max: 350 psi/24 bar

$14.99
Replacement hose kit for MSW AirLift floor pumps.
- Smart head fits on both Presta and Schrader valves
- Extra-long 48-inch hose
- Barb-type hose connection

$4.95
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

$4.95
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

$4.95
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

$5.90
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

$3.25
Head rebuild kit for current Domestique and Prestige floor pumps.
- Includes two caps and two gaskets.

$10.99
Compatible with Planet Bike ALX, AL, STX, ST, and COMP floor pumps
- Dual head with hose
- Will work with any floor pump Planet Bike has made except for Air Supreme

$17.99
If you're rolling on fat tires, the Fat Max 15 is for you. Most tire gauges just don't offer the precision needed for fat tires where 1 or 2 psi can make a huge difference. The strong and durable Fat Max 15 is specifically designed to read tire pressures from 2-15 psi so you can take the guess work out of finding the right pressure for your fat tire bike.
- Designed with a low pressure range of 2-15 psi specific for fat bike tires
- Durable case and crystal lens
- Retains reading until reset
- White face plate for easier reading
- Compatible with Presta valves with removable core
- Presta/Schrader adaptable head
- Length: 120mm
- Weight: 101 grams

$16.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head.
• Presta valve
• 90 degree inflator works with most pump heads

$10.99
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves

$36.99
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

$8.99
The Iconic SILCA 24.1 gasket is the heart of the press-on Presta chuck. The current 242 gasket utilizes a high tech and very red, fully synthetic elastomer base material.

$9.00
The factory replacement for SILCA Press on Disc Chucks. The 252 replace the classic SILCA 25.1 gasket after more than 20 years in the market. This unique gasket borrows from industries which require air-tight seals in the harshest of environments. The 252 gasket utilizes a high tech, full synthetic elastomer base material. It tests to a life expectancy of more than 5X the carbon filled rubber or Buna-N materials used previously. In tests with a major disc wheel manufacturer, the current SILCA Disc Wheel Adapter with 252 gasket excelled by posting a blow-off pressure of 393psi where other designs were unable to reach 120psi. Older versions of the SILCA Disc Wheel Adapter will still benefit for the new gasket, but have a lower hands-free max pressure.

$12.00
This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection.
- Hose barb fits into all SILCA hoses both old and new
- Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter)
- All metal construction, nickel-plated brass

$20.00
n partnership with the rubber and tire experts at Continental , we are offering a custom extruded 3/16" ID air hose compatible with all historic PISTA Handles.

$38.99
The unique bright red gasket borrows from industries that require air-tight seals in the harshest of environments and tests to a life expectancy of more than 5X the carbon-filled rubber or Buna-N materials. The 252 gasket mates with a new compression head design allowing the user to tighten the gasket fit by nearly 200% with a simple twist of the cap. In tests with a major disc wheel manufacturer, the SILCA Disc Adapter literally blew away the field by posting a blow-off pressure of 393 psi, more than 3X the pressure achieved by any competing design.
- CNC'd 6061 aluminum alloy construction
- Knurled gripping surfaces
- Threads into any Schrader pump head
- Easily replaceable gasket

$70.00
Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere.
- Full metal construction, guaranteed for 25 years and covered by SILCAShield
- Can effectively seal on valve stems as short as 10mm!
- Uses SILCA 254 High-Tech Elastomer gasket
- Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear
- Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose
- Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.

$13.99
90 Degree twist style mini CO2 head used on SWAT products
- Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow.
- Flow can be controlled or stopped by threading cartridge back into head.
- Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
Page 1 of 2
Next page