Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools

$119.95
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle bikes
$25.00 - $41.99
- Anti-Loosening, Anti-Corrosion thread prep with PTFE - Two colors offer coating for different spoke lengths
$9.99
This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually
$47.25
BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
$261.99
This 7-piece adapter set is used to install 22mm and larger inside diameter sealed bearings into bottom brackets. Includes adapters for the most common bottom bracket bearings for Shimano outboard cup BBs (HollowTech II), SRAM GXP, Truvativ, FSA, PF30 and BB30 bottom bracket bearings. - Includes open bore drifts for 6805, 24x37, BB30, PressFit30, GXP and BB86 bearings - 10mm ID hole, for use with Wheels Manufacturing bearing press handles - Compatible with Wheels Mfg. PRESS-1 or PRESS-4 handles
$39.99
Wheels Manufacturing Aero Rim Nipple Driver - Installs spoke nipples in hard-to-reach rims, like aero and deep profile designs - Speeds up wheel building and spoke replacements.
$41.50
Wheels Manufacturing Sealed Bearing Extractor - 30mm Fits: - 6806 - Other bearings with an inside diameter of 30mm
$49.99
High-quality L-key set with color-coded, convenient plastic sleeve. This ensures that the tool is quickly to hand and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The wear-resistant clip material ensures secure storage of the L-keys as well as simple removal. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. - Hex-Plus allows socket head screws to live longer - Hexagonal ballpoint on the long arm - With Take-it-easy tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures
$24.99
The basics of what you need to perform maintenance on TRP and Tektro hydraulic disc brakes. Includes the following: - 1 Syringe - 1 Plastic tubing for syringe/caliper - 1 Plastic tubing for lever/overflow - 1 M5 Silver bleed fitting - 2 M6 Silver bleed fittings - 1 M7 Black bleed fitting
$9.99
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.
$24.99
- 5 DART plugs for use with the Stan's NoTubes DART tool
$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
$39.99
The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or MATTONE. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Nove (No-vay) 9 forged and plated tools: Hex 2/3/4/5/6/8 +Torx 25 +PH2/Flat - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - NOVE- 79 grams
$44.99
The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or Seat Roll Premio. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Tredici (Tre-dee-chee) 13 forged and plated tools: Hex 2/2.5/3/4/5/6/8 + Torx 10/20/25 + PH2/Flat + DiscPadSpreader. - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - 98 grams
$124.99
Roughly 70% of damage to high-end carbon components like seat posts, handlebars, and stems happen when making adjustments without using torque measurement. This problem is accentuated by the majority of adjustments occurring on the roadside or trail-side. T-Ratchet + Ti-Torque solves these problems by delivering a highly ergonomic tool with a torque measuring extender that provides real-time feedback as you are tightening the fastener. The Ti-Torque beam has three separate scales on it, 2-6, 3-5, and 4-8, which allow you to easily see when you've reached your desired torque setting. Ti-Torque weighs in at a mere 30 grams meaning you'll hardly notice it's there until you need it. The T-Ratchet uses interchangeable magnetic components to convert from a screwdriver to a ratchet, to a ratcheting T-Handle in seconds, which gives the user the ability to have several tools at once in an extremely small package. - Ti-Torque beam with three separate scales for measuring 2-8Nm - Precision ratchet with convertible magnetic extension - Steel bit extender - S2 steel Hex bits: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm - S2 steel Torx bits: T10, T20, T25 - S2 steel 2mm Phillips head bit - Duck-waxed canvas carrying case measuring 120mm x 70mm x 30mm - Kit weight: 220 grams
$24.99
Modern carbon rims and tires create a real challenge for traditional tire levers, and the new wave of tubeless setups have taken the challenge to the next level. Tire fits are tighter than they've ever been, while carbon rims require non-metal levers to resist damage to the bead or brake surface during use. Previous solutions to this problem have involved using a metal core inside of a plastic lever however, this solution has its own challenges as the core of the lever is where you can add the least stiffness and strength. This leaves metal core levers both less stiff and heavier than they need to be. - Forged alloy blade - Reinforced nylon Rim Shield safe for use on carbon rims - Integrated spoke-hook wing - 105mm x 25mm x 7mm (Perfect for Seat Roll Premio or EOLO Wallet) - Weight (Two levers and neoprene sleeve)—36 grams
$19.99
Shimano Genuine disc brake bleed Funnel unit for ST type Road brake lever (M7 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below
$19.99
Shimano Genuine disc brake bleed Funnel unit for BL type MTB brake lever (M5 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below
$12.99 - $32.99
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
$299.99
To achieve maximum suspension performance, proper setup and tuning are essential. Go to www.rockshox.com/app for suggested air spring pressure and rebound damper settings for your fork. Go to www.sram.com/service for additional product and technical information. Air spring pressure and coil spring tables are available in the RockShox® Front Suspension Oil, Air, Coil, Token, and Specification documents. For a complete list of available coil springs and Bottomless Tokens™, consult the RockShox Spare Parts Catalog. Consult the RockShox service manual for your fork for complete disassembly and assembly procedures. Tuning suggestions are starting points. It may take trying various adjustments to find the settings that work best for each individual rider and trail condition. - Includes complete right-side internals
$49.99
- 50 hour service kit for Deluxe and Super Deluxe rear shocks - Includes air can seals, piston seal, and glide rings
$18.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$51.99
- RockShox, 11.4118.038.002, Service kit, Monarch Plus B1 2014+
$62.00
- Pike Dual Position Air A1 1 year service kit - Includes dust seals, foam rings, o-ring seals, Charger sealhead
$79.99
This kit contains all the parts needed for scheduled maintenance and/or rebuild of A2 non-Stealth Reverb Seatposts. - Includes new, upgraded IFP - Requires RockShox Specialty Tools to perform Service: Oil Height Tool, IFP Height Tool
$19.99
Vivid Air Rear Shock Basic Service Kit - Includes replacement seal, bushing, o-ring, and bottom-out/negative-bumper
$5.00 - $120.00
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking
$18.99
Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.
$30.99
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45–47 mm and a minor diameter (inside of notches) of 44 mm, including: - SRAM BSA DUB - Race Face Cinch - Rotor BSA30 - Zipp Vuma - Hawk Racing BB3086 - and more - 3/8" drive fitting
Page 1 of 4 Next page