The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
The eeWings Mountain titanium cranks were designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers—though they will benefit any rider who puts a premium on durability, stiffness and weight. - Ultimate in stiffness and durability while only weighing a mere 400 grams—in the same weight range as premium carbon cranks, but 20% to 30% stiffer - CNC aluminum BB preload adjustment ring included - Fitment compatibility across multiple frame standards, bottom bracket sold separately - 176mm Q-Factor - 30mm spindle is compatible with the following bottom brackets: BSA73mm, PF92/89.5, BB30 (External Bearing Only), PF30 (External Bearing Only), and 392EVO - Backed with a 10-year limited warranty
Dimension Cruiser one-piece hot-forged chromoly steel cranks. - One-piece, hot-forged chromoly steel crank - Cruiser chainwheels sold separately - Requires 24 tpi American bottom bracket - Crankset has 1/2-inch pedal threading
The EC90 SL crank utilizes the Race Face CINCH technology, which allows for direct mount 1x rings as well as direct mount 2x spiders, and industry-leading versatility. Increasingly popular 1x setups have many advantages including weight and simplicity. Their major limitation is adaptability. A Cyclocross rider's ability to ride a course, then effortlessly change chainrings to their preferred setup is a major necessity that has, until now, been overlooked. Easton refines the design for larger ring applications with improved chain retention while reducing running noise and friction. Arms come assembled with spindle. Rings and BB sold separately. - EC90 SL carbon arms feature hollow carbon construction, while the spindle and pedal inserts features high-grade aluminum - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation - Chainline: 1x 47mm / 2x 45mm - Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - 30mm spindle - BB Options: BB86, BSA 68mm, PF30 68mm, BB30 68mm, BBright, 386Evo - Bottom bracket and chainrings sold separately
FSA JIS Square Taper eBike replacement crankarms. Note: Spindle bore orientation varies with crank arm length - 155mm arms have diamond spindle bore orientation with sides at 45° angles to the crank arm - 170 & 175mm arms have square spindle bore orientation with sides parallel to the crank arm
FSA Shimano STEPS eBike replacement crankarms.
$42.99 - $46.99
FSA BROSE eBike replacement crankarms.
The Omega crankset is where fashion meets function, combining sleek styling with robust industrial design elements. Updated 11-speed compatibility puts the latest shifting technology into an attractive, price-conscious crankset. - Die-cast aluminum crank arms are lightweight and durable - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Number of Chainrings: Double - Pedal Spindle: 9/16" - Chainline/Hub Compatibility: 130 Hubs - Rings: 50/34 - Spindle Interface Type: FSA MegaExo 19 - Chainring BCD: 120, 90 - Bottom Bracket Included: No
To be in sync on a tandem is the essence of the experience. FSA's Gossamer tandem cranksets keep your timing perfect, and keeps the power going to the rear wheel where it belongs. The communication and balance? That's up to you and your partner. - Shimano and SRAM 10-Speed compatible
Not ready for carbon? The Gossamer is a high-end crankset for alloy lovers. With an impressive history of wins on the brutal cobbles of Paris-Roubaix, it needs no further introduction—yet the details shouldn't be ignored. The cold-forged aluminum arms are heavily scalloped for the maximum strength-to-weight ratio, and the versatile BB368EVO spindle is forged from an even stronger material. The 30mm BB386 EVO spindle is compatible with virtually every frame standard available by choosing the appropriate BB. The chainrings are CNC-machined from still-tougher 7075 aluminum, then recess-machined and pinned for rapid precise shifting. Boosting overall stiffness our ABS system—Asymmetric Bolt Spacing—with the chainring bolts strategically spaced to provide optimum strength from a 110mm BCD. - Cold-forged AL6061/T6 aluminum crank arms - Forged AL7050 BB386EVO spindle - AL7075 100% CNC chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems
Not ready for carbon? The Gossamer Pro Modular AGX+ is a high-end crankset for alloy lovers. The cold-forged aluminum arms are heavily scalloped for the maximum strength-to-weight ratio. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Cold-forged alloy spider - CNC-machined alloy spindle - Chromoly chainring bolts - Q-Factor - 154mm - Chainline - 47mm - BCD - DM/90mm - Chainrings - 46/30T - 656 grams (46/30T x 170mm)
To be in sync on a tandem is the essence of the experience. FSA's Gossamer tandem cranksets keep your timing perfect, and keeps the power going to the rear wheel where it belongs. The communication and balance? That's up to you and your partner. - Shimano and SRAM 10-Speed compatible - 2 bottom bracket spacers allow for adjustable chainline - 35.0mm tandem-specific braze-on front derailleur clamp included with rear cranks - 7900 and Campagnolo 11-speed compatible chainrings sold separately
The latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow forged arms - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs - Spindle Interface Type: 386 EVO - Chainring BCD: 90, Direct Mount FSA - Pedal Spindle: 9/16" - Crank Intended Use: Road, Gravel - Crank Length: 170mm - Rings: 46/30 - Drivetrain Speeds: 11 - BB Included: No - Weight: 755
$382.99 - $543.99
The FSA SL-K carbon tandem cranks feature an asymmetrical modular compact 2 x 11-speed spider, 30mm spindle, and tons of adjustability. - Hollow carbon arms with UD carbon finish - Asymmetrical 110 A.B.S BCD achieves 4 chainlines (44,47,50,53) - English BB included - 104 BCD timing spider - 653 grams - Number of Chainrings: Single - Crank Intended Use: Tandem - Pedal Spindle: 9/16" - Rings: 38 - Spindle Interface Type: 392 EVO - BB Included: English
The KFX Super Light crankset is the pinnacle of FSA's manufacturing capabilities. Ultra light and stiff, this crankset will standup to the toughest riding conditions. Feeling equally at home on an enduro trail as it does on a flowing CX ride, this is the crankset that'll shed weight while instilling confidence. - Modular - Thanks to this interchangeable system, any rider or mechanic can easily, quickly, and safely swap out the spider, spindles, and chainrings from one set to another - Lightweight - The KFX range brings a selection of lightweight and stiff components to mountain bikes - Revolutionary Manufacturing Process - Each KFX crank arm starts out as two separate forged blanks that are precision CNC-machined into two pieces. The hollowed-out halves feature a series of three main ridges & grooves down the outside of each arm that form a tightly interlocking single piece - Number of Chainrings: Single - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Rings: 32 - Spindle Interface Type: 392 EVO - Drivetrain Speeds: 10, 11 - Chainring BCD: Direct Mount FSA - BB Included: No
SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow carbon fiber arms with UD finish - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems
This Hollow Carbon Crankset features reduced weight, and excellent stiffness. The K-force WE system is perfect for triathlon and/or time trial riders who want advanced technology without the bulk. - Lightweight hollow carbon arms with UD carbon finish - Maximum frame compatibility with a forged AL7050 BB386EVO spindle - Innovatively designed for a better ride, the variable thickness means that it’s reinforced at critical stressed areas and reduced in other areas for lighter weight - Chainring pins are AL7075 forged then 100% CNC 3D machined, to increase outer chainring stiffness and provide efficient up-shift pin design for full-power performance - AL7075 Torx T-30 alloy chainring bolts - Number of Chainrings: Double - Crank Intended Use: Road, Tri - Pedal Spindle: 9/16" - Rings: 50/34 - Spindle Interface Type: 386 EVO - Drivetrain Speeds: 11 - Chainring BCD: 110 - Weight: 534 - BB Included: No
Promax SQ-1 Crank Arm sets more than cover your need for hard-to-find lengths and hard-to-miss colors. - BCD: 110mm - Weight: 25.2 oz.
RaceFace Ride crank arms are forged from 6066 aluminum with aggressive styling for a high strength to weight ratio. - Bottom bracket sold separately
The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight and an attractive price point. Features the CINCH system with its interchangeable spider options and a 24mm EXI interface spindle. - Crank arms forged from 6066 aluminum - Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards - Compatible with direct mount, 1x, 2x with - and without bash, and 3x configurations - 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS cup BB tool for removal and installation - Bottom bracket sold separately
The Race Face Atlas crank is the burliest alloy CINCH offering; designed to excel across many disciplines including trail, enduro, DH and freeride. Featuring the versatile CINCH interface for interchangeable spiders, limitless ring combinations, a 30mm alloy spindle and compatibility across all relevant frame standards. - Forged 7050 aluminum alloy arms - Bracing matrix at the back of the crank arms for added stiffness - Industry standard 30mm spline interface - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - Interchangeable spindle option of the Cinch system allows you to use the same crankset with 68/73mm and 83mm frames, as well as the RF BMX spindle and spider - Spindle diameter: 30mm - Direct mount chainline: 48.5, 55mm (Flipped) - 2X Cinch spider chainline: 47mm - Boost 2X Cinch spider chainline:50mm - Weight: 690g
- Manufactured from UD Carbon with matte clearcoat - Handmade in Canada - SixC G2 Pedal Insert for increased Rally Factor - Burlier 7050 Spindle - Cinch technology for game-changing compatibility
Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - Cinch technology for game-changing compatibility - Includes 30mm spindle, for 68/73mm BB shells
Built off the proven Next R crank arm shape and spindle insert, the Next SL stands to be lighter, with major improvements in durability and carbon consistency. Made in Canada with American-sourced carbon, the Next SL is also stiffer, improving power transfer and giving you the competitive edge on your pedal-oriented cross country rig. - Increased stiffness and strength improves power transfer - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - Includes 30mm CINCH spindle, and is power meter compatible - Direct mount chainline: 52mm / 58.5mm (Flipped Ring) - 2X Cinch spider chainline: 50.5mm - Boost 2X Cinch spider chainline: 53.5mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Chainring BCD: Direct Mount CINCH - Weight: 418 - BB Included: No
Youth sized 9-speed, triple crankset with melt-forged crank arms intended to be used with square taper bottom brackets. - Alloy crank arms - Steel chain rings - 50mm chain line with a 113mm spindle - Integrated chain guard - Number of Chainrings: Triple - Chainline/Hub Compatibility: 135/142 MTB Hubs - Spindle Interface Type: Square Taper JIS - Chainring BCD: 104, 64 - Pedal Spindle: 9/16" - Crank Intended Use: Mountain - Rings: 44/32/22 - Drivetrain Speeds: 9 - BB Included: No
Suntour's XCM-T is a 9-speed triple crankset with melt forged alloy arms that comes in either square taper or Octalink bottom bracket options. - Steel chain rings - Forged alloy crank arms - 50mm chain line with a 113mm BB
SRAM's S600 3.0 Crankset features forged arms for increased strength and reliability paired with smooth shifting chainrings for the best combination of looks, performance and price.
Lightweight, durable, stiff and designed specifically to work with Bosch and Brose mid-ship motors, SRAM's EX1 crankarms are purpose built for the high-torque E-MTB environment. - Proven SRAM technologies adapted for the demands of midship-motor E-MTBs - Compatible with Bosch, Brose and Yamaha bottom bracket interfaces - Arm Material: Aluminum - Colors: Black - Bottom Bracket Interface: ISIS
$69.00 - $94.00
The SRAM SX Eagle Crankset includes Eagle platform styling and features at an entry-level price point. SX Eagle cranks are compatible with all levels with SRAM Eagle drivetrain systems. - Offers the same chain retention performance as seen in all higher-level Eagle drivetrain cranks - 32T direct mount X-SYNC 2 steel chainring included - Aluminum crank arms - 11/12-speed compatible - Bottom bracket sold separately
Page 1 of 2 Next page