Packs/Racks/Baskets

Xlab's Mini Bag is a small seat bag perfect for carrying the essentials. Can fit a tube, tire levers, inflator, patch kit, and two 16-gram CO2 cartridges. Small enough to tuck under your saddle or inside your Super Wing or Carbon Wing rear carrier. It's made from tough Cordura, is easily attached with the hook-and-loop straps, and it works with round and aero seatposts.

Square top-tube boxes are not aero, so step in the Rocket Pocket! The streamlined design of the Rocket Pocket eliminates stem drag. The non-slip surface underneath provides sturdy nutrition storage. An easy-slide rubber zipper pull allows for a quick, easy open and close to keep your focus on the road. Silver interior lets you find your nutrition or salt tablets quickly. It can fit the longest energy bars

Airfoil Shape bag large enough to fit phones up to 6.75" (172mm) diagonally. Includes inside pocket for small items. Has extra long front strap, ideal for standard stems. 3.3" high, 46 cu.ins (750cc) capacity. Includes hang tag to promote cell phone usage! Structured, strap mounted bag for standard stems fits cell phones up to 6 3/4" (171.45mm) diagonally and 6-8 gels. - Upgrade to a new, higher capacity top tube bag perfect for handling larger cell phones - Comfortably fits 6-8 gels along with cell phone, or 10 gels without a phone - Keep tablets or used gel wrappers separate in a handy inside pocket - Rubberized bottom keeps the bag in place - Avoid an overheated smartphone on those hot sunny days - bag interior is insulated! - Highly visible, silver colored interior makes it easy to see contents and stay focused on the road Keep Focused on the Road: Smarter Features for Easy-Access Storage - Wide access opening to easily remove and handle cell phone - Inside pocket for tablets, cash or sticky used gel wrappers - Large, easy-pull zipper for ease of access even when race day adrenaline is at its peak - Silver colored interior makes it easy to find contents - One-handed Super-Slide zipper Aerodynamic Design Tucks Right In Behind Stem - Structured shape perfectly optimized to tuck in behind stem and headset spacers without increasing frontal area - Extra long straps ensure security on all styles of bike configurations Contents Stay Cooler - Insulated sides keep your nutrition cooler

The Stealth Pocket 200 mounts directly to your top tube on the bolt bosses found on some bike models. It has a 72 degree front that fits tight up against the stem to eliminate turbulent air pockets. The bag reduces drag caused by the stem and headset spacers (note: measure stem height to height of bag). The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. It features a specially designed insert to maintain the aero form of the bag to help you go that much faster!

Ultra durable outer showcases a ‘carbon-look’, stylish matte finish. Modern material deflects the elements maintaining high resistance to wear, perspiration and electrolyte drinks. The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. Mounts to top tube with Velcro straps. - Capacity: 23.2 in3 (380 cm3) - Weight: 2.7 oz (76g)

No more fumbling for salt, electrolyte or Ibuprofen tablets. Stealth Pocket XP debuts four outside pockets for easy access to the small vitals that make the big difference. The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. Mounts to top tube with Velcro straps. - Capacity: 23.2 in3 (380 cm3) - Weight: 2.7oz (76g)

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

Rack 'em up Turn your ride into a pedal-powered grocery getter with the Trek BackRack MIK Bike Rack. The updated design means it's compatible with even more bike frames, making it your go-to bike rack for most bikes. Direct-mount installation is quick and easy with the included hardware that secures into the eyelets already built into your frame. Threaded accessory eyelets add functionality and easy light installation. Plus, it's MIK compatible so you can securely mount MIK trunk bags or accessories in seconds. The additional height makes it easy to mount with all bikes, including mountain bikes like the Trek Marlin. Product details - Quick and easy install adds storage and utility to compatible bikes - MIK mounting system provides secure, integrated mounting with compatible bags - Integrated eyelets make it easy to mount lights or other accessories - Compatible with MIK, standard trunk bags or panniers - Single-bolt strut mounts allow maximum adjustment and easy installation - Compatible with inboard style disc brakes (brake mounted between seatstay and chainstay) - Additional height makes it compatible with more bikes including the Trek Marlin - Max weight capacity 25kg (55 lbs.), not intended for use with child carriers

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender as well as a spring-loaded bar to hold down your belongings.

The Thule Paramount Hybrid Pannier 26L seamlessly transitions from a bike pannier to a backpack, perfect for commuting to work or getting around town. The bag includes interior organization for 16" laptop, 11" tablet, and plenty of bulk storage space for books, lunch or extra clothing Easy and secure attachment to the bike rack thanks to the attachment hardware, with an optional strap around lower portion of bike rack if additional stability becomes necessary Converts easily into a backpack, simply unzip the back panel, flip it over, and rezip the back panel so that the backpack shoulder straps are outward facing - Padded straps, ventilated ridge foam and robust support structure for comfortable carry - While the bag is already weather-resistant, the additional rain cover provides protection from hard rain and visibility at night thanks to its all-over reflectivity - The durable, PU-coated YKK zippers and weather-resistant materials free from harmful - PFAS chemicals are easy to clean, and provide protection in bad weather - Quick-access front pocket is great for storing bike lock, gloves or rain jacket - Zippered pockets on sides and top of bag make personal items or work essentials easy to reach - Attach helmet through straps on front of bag for hands-free transport when off the bike - Bike light loop and reflective details help you stay visible at night

These fork-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low position maximizes handling stability, and this front option leaves the rear rack open for carrying passengers or even more cargo options. *Third-party panniers are not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two adapters (one for each side of the fork) and all required hardware. - 8kg (18lb) load capacity per side. - All tools required for assembly included with the purchase of the Haul ST or Haul LT bike

These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams

The EXP Series Dry Bag is tailored to fit the Anything Cradle, attached via a pair of our Anything Cradle Straps. Fully welded construction, maximum versatility, and clever hook and loop points for ease of attachment make this supremely useful dry bag a crucial part of your bikepacking set up. - Materials: 420D Nylon with TPU lamination and PU coating - Construction Methods: Fully welded-in construction Dimensions: - Length: 850mm - Diameter: 200mm Features: - Slots and hook and loop for easy installation - Slots for straps to keep bag from moving sided to side when installed - Waterproof welded-in design - Weight: 220g - Volume: 15L

The iconic big seat bag for big trips! The Viscacha (vis-KA-cha) does it all. Take it on the Great Divide Route, the Iditarod trail, or any other epic route. Proven time after time in the longest and hardest endurance events on the planet, whether dirt, pavement, or snow. Features: - Roll-down closure allows bag to expand or compress in volume - EVA stiffened front and bottom plastic sheet provide rigidity and structure for load carrying - Adjustable position saddle rail strap with urethane-coated webbing provides fore-aft adjustment along saddle rails - Internal compression strap for snug packing and internal separation - Overkill aluminum loop seatpost wrap strap - Loops on top for attaching a bungee or spocket - Carbon seatpost friendly - Made in the USA with domestic and imported materials Sizing: - Minimum of 9.5" clearance from saddle rails to top of tire - Minimum length of exposed seat post is 5" - This is a big seat bag. Check tire clearance with bag properly packed and loaded prior to use to prevent bag damage or worse. On full suspension bikes fully compress rear suspension and check tire clearance prior to use. Using a Thudbuster post? See www.revelatedesigns.com for more information. Specifications: - Weight: 13.8 oz. - Volume: 6L - 14L - Materials: VX 21 X-pac; Rhinotec gusset panel; high-density EVA foam; HDPE plastic

Shield nutrition from the wind with this E-pack storage system that mounts directly behind the stem. Its streamlined design improves airflow from stem to bike frame to improve overall aerodynamics when riding. - Bolt-on compatibility with TT frames. Can also be mounted with Velcro straps (not included) - Injected Nylon and Glass Fiber with foam base - Slotted mounting for fore/aft adjustment - Dimensions: 210mm x 40mm x 57mm - Includes FPS (Frame Protection Strips) to protect the frame when installing with cable ties - Weight: 161g

What should you do with all those small, but important extras on your bikepacking tour? The best place to put your snacks, smartphone, rain slicker, and other items is in your ORTLIEB Accessory-Pack. This convenient volume expander for your Handlebar-Pack keeps your things secure, absolutely waterproof, and quickly accessible at all times. Use the metal hooks to securely attach the Accessory-Pack to the four points of attachment on the Handlebar-Pack. And if you don't plan on spending the night outdoors and don't need your Handlebar-Pack, you can still use your Accessory-Pack as a handlebar bag thanks to its pre-mounted Velcro straps. You can even use the carrying strap to transform the lightweight bag into a shoulder or hip bag.

Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - Fits up to 29 x 3-inch tires, with room for fenders. - Front or rear mountable. - Works with all dropper posts. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability, and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55lbs when eyelet mounted. - For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black. - 960g including all hardware and extenders. - Made in Taiwan. - Lifetime warranty!

The King Carrier is made from premium wood slates and strong welded steel tubing. A fantastic looking rack that will last a very long time. - Designed with built-in bottle opener and room for 12 beverages - 18 x 13 x 20.5 inches - Limited to 40 lbs. load - Power coated and welded steel tubing - Wood slates with Gamoh logo

Carry just the essential roadside/trailside tools with the MSW Tool Hugger. Sleeves are designed to fit tire levers, CO2, inflator, patch kit, multi-tool, and a tube (all sold separately). Works well standard saddle rails, or just toss it into a jersey pocket. - Durable Cordura outer layer - Seven elastic tool compartments - Hook and loop closures

Lezyne's Energy Caddy XL is a large, simple toptube organizer for quick on-bike access to yummy snacks or little trinkets. Water-resistant, zippered main compartment with side sleeves. Large enough to hold smartphones. Durable, high-quality materials. Reflective features for added safety.

Lezyne's M-Caddy with CO2 Repair Kit is a complete and convenient solution for the rider with speed in mind. It features a Twin Speed Drive CO2 inflator, two 16g CO2 canisters, a RAP 6 multi-tool, and Matrix tire levers in an M-Caddy bag that tucks neatly under your bicycle seat. Be prepared with all the essentials needed for a competition or any situation where a quick repair and tire inflation is a must.

SLIM AND LIGHTWEIGHT FOR MTB Because of the 10L cargo storge the 1.5 Hydration MTB Lite is the perfect bag for those long rides where you may need to carry a waterproof coat should the weather change and some tools in case repairs are needed, also includes a 1.5L bladder and bite valve, there is also a magnetic catcher that comes with the feed tube, so it stays in place. We have a new one size fits all harness system for the chest to ensure the bag stays in place and AirLine back ventilation ensures sweat is kept to a minimum. Dual hydration tube routing means you can choose, over the shoulder or under the arm/left or right - 1.5L Hydration and 10L Cargo - Unique lightweight chest harness for a rock solid fit - Ready to fit optional CE tested and certified as impact protection. - Light, durable outer shell - Full-face/MTB helmet and neck brace carrier system - Dual hydration tube for two-way routing – over the shoulder or the under arm - Optimal AirLine back ventilation - Magnetic tube catcher can be positioned on left or right harness - Auto Shut-off bladder bite value - Reflective slotted patch allows optional safety - Optimized fit with or without a Leatt neck brace

Handlebar dry bag made to fit on flat handlebar - Fabric: Nylon/Hypalon for extreme durability - Attach System: 2 hook-and-loop straps to stabilize around the handlebar - Opening Feature: Double Roll bag opening with buckles for easy opening and storage - Features: Compression air valve - Dimensions: 7 L /180 X 390mm - Visibility Features: Reflective elements for safety

Technical Details: - Attach System: Adjustable hook-and-loop strap - Double-position main straps to fit any saddle rails position - PU reinforced to protect the bag against abrasion - Water-resistant zips with lock zipper slider to prevent opening while riding - Dimensions: O.75 L/45 CU - Visibility Features: Rear and side reflective fabric for high visibility

For those looking to carry a bit more, the Large Seat Bag is designed with a zip below to allow more room when needed. Large enough to hold two tubes, multi tool, energy bar, and other essentials. Durable poly fabrics. Velcro straps keep it secure on the bike and cinched up tight. Design & Function: - Slim profile designed to fit underbike seat - Expandable zipper for additional storage - PU coated, 600D polyester main body fabric - Easy attach hook and loop